Safety Precautions - Panasonic TY-SP58P10WK Instrucciones De Instalación

Safety Precautions

CAUTION
After installing the speakers, do not hold or move the display by lifting the speakers.
• The mounting brackets may get damaged, and personal injury may result.
Do not suspend the speakers.
• Personal injury may result if the speakers fall off. Take particular care to ensure the safety of children.
These speaker are for use with the Plasma Display.
• If connecting them to some other amplifier, make sure that the maximum input is within the rated level(8W). If the
input level is exceeded , fire may result.
Make sure that all screws are tightened securely during installation.
• Ensure that the installation is carried out correctly to prevent the speakers from becoming detached, and possibly
causing possible personal injury.
Accessories
Mounting bracket
(right) .......................2
Mounting bracket
(left) .........................2
Installation
1. Attach the sponges to the
speakers.
For right
• Attach the sponges to the surfaces which are in
contact with the Display.
• Clean the surfaces before attaching the sponges.
• Attach the sponge along the rib on the speaker.
2
Bracket mounting
screw .....................12
Installing to the Plasma Display
Trim
Sponges
rib
Side of the
speaker
Sponge ....................2
2. Attach the mounting
brackets to the speakers.
Speaker (right)
Mounting
brackets
(right)
For left
Bracket mounting
screws
• Secure the top and bottom mounting bracket by
tightening the bracket mounting screw.
• As shown in the enlarged views, adjust the
speakers so that there is some clearance between
them and the display by sliding the right speaker
to the right, and the left speaker to the left, and
then secure the bracket mounting screws.
• Securely tighten the bracket mounting screws.
Speaker cable
(28 cm) ...................2
Speaker (Ieft)
Mounting
brackets
R
(left)
L
Bracket mounting
screws