Makita XWT02 Manual De Instrucciones página 7

Tabla de contenido

Publicidad

Idiomas disponibles

Idiomas disponibles

When the reversing switch lever is in the neutral
position, the switch trigger cannot be pulled.
Changing the impact force
1
2
3
4
1. Changed in three steps
2. Hard
3. Medium
4. Soft
5. Button
014644
Impact force grade
displayed on panel
Hard
Medium
Soft
014829
You can change the impact in three steps: hard,
medium and soft mode.
This allows a tightening suitable to the work.
Every time the button
is pressed, the number of blows
changes in three steps.
For approximately one minute after releasing the switch
trigger, the impact force can be changed.
All manuals and user guides at all-guides.com
5
Maximum blows
Tightening when force
3,500
-1
and speed are desired.
(min
)
2,600
Tightening when you need
-1
good controlled power.
(min
)
Tightening when you need
1,800
fine adjustment with small
-1
(min
)
diameter bolt.
7
Application
Assembling the steel frame.
Assembling or disassembling
scaffolds or framework.
Assembling the furniture.
ASSEMBLY
CAUTION:
Always be sure that the tool is switched off and the
battery cartridge is removed before carrying out
any work on the tool.
Selecting correct socket
Always use the correct size socket for bolts and nuts. An
incorrect size socket will result in inaccurate and inconsistent
fastening torque and/or damage to the bolt or nut.
Work

Publicidad

Tabla de contenido
loading

Tabla de contenido