Operation And Maintenance; Technical Parameters; Environment Protection - GRAPHITE 59G522 Manual Del Usuario

Just after the operation is finished, the nozzle will be hot. Avoid direct contact and use appropriate
protective gloves, or wait until it cools down.
Do not use plastic knives to remove paint heated with the hot air gun.
Unplug the power cord from mains socket before commencing any activities related to installation,
adjustment, repair or maintenance.
Keep the hot air gun clean and ensure free air flow.
Protect the hot air gun against water.
Do not clean the hot air gun with water or chemical cleaning agents.
Use soft cloth for cleaning the body.
Store the hot air gun in a dry place, beyond reach of children.
Entrust replacement of power cord and other repairs only to qualified persons, use only original parts.
All faults should be repaired by service workshop authorized by the manufacturer.
RATED PARAMETERS
Parameter
Supply voltage
Current frequency
Rated power
Temperature
Air flow
Protection class
Protection against overheating (thermal switch)
Weight
Year of production
Do not dispose of electrically powered products with household wastes, they should be utilized in
proper plants. Obtain information on waste utilization from your seller or local authorities. Used up
electric and electronic equipment contains substances active in natural environment. Unrecycled
equipment constitutes a potential risk for environment and human health.
* Right to introduce changes is reserved.
"Grupa Topex Spółka z ograniczoną odpowiedzialnością" Spółka komandytowa with seat in Warsaw at ul. Pograniczna 2/4 (hereinafter Grupa
Topex) informs, that all copyrights to this instruction (hereinafter Instruction), including, but not limited to, text, photographies, schemes,
drawings and layout of the instruction, belong to Grupa Topex exclusively and are protected by laws accordingly to Copyright and Related
Rights Act of 4 February 2004 (ustawa o prawie autorskim i prawach pokrewnych, Dz. U. 2006 No 90 item 631 with later ammendments).
Copying, processing, publishing, modifications for commercial purposes of the entire Instruction or its parts without written permission of
Grupa Topex are strictly forbidden and may cause civil and legal liability.

OPERATION AND MAINTENANCE

TECHNICAL PARAMETERS

Hot Air Gun
gear I
gear II
gear III
gear I
gear II
gear III

ENVIRONMENT PROTECTION

15
Value
230 V AC
50 Hz
2000 W
25 0 C
0
350 C
550 0 C
300 l/min
150 l/min
500 l/min
II
yes
0,9 kg
2016