How To Confirm Bridge Is Enabled - Kingston MobileLite Wireless G3 Manual Del Usuario

Continued from last page...
4. Select a trusted Wi-Fi network.
5. The MLW app will prompt for the Wi-Fi password of the Wi-Fi network selected if security is
enabled.
6. The MLWG3 will restart once OK is clicked. If there is no password, the MLW device will
automatically restart.
4

How to Confirm Bridge is Enabled

Once the MLWG3 has restarted, you'll have to reconnect to the MLWG3 Wi-Fi network.
To verify that you have successfully enabled bridge mode:
1. Check the bridge status icon at the top of the screen is no longer grayed out.
2. If you return to the 'Wireless Network Setup' in 'Settings', you will see a red check mark next to
the connected network. Here you can click the 'x' to forget network if desired.
3. The bridged LED will light up on the MLWG3 device indicating the device has internet access.
Also, while connected to MLWG3, open an Internet browser and enter a URL, like Kingston.com, to
confirm you have internet access.
1
Document No. iOS-MLWG3-011816.A00
Bridge
Enabled
MobileLite Wireless G3
5
2
Bridged
LED
6
Page 24 of 28