Caring for your AquaSmart™ washer
36
When you have finished the cycle
Turn off the faucets to prevent the chance of flooding should
a hose burst.
Unplug the washer from the wall socket.
Cleaning your AquaSmart™
Before you start cleaning your AquaSmart™ washer, ensure
that it is turned off at the wall or that the Key Lock mode has
been activated (refer to page 34).
Cleaning the Soft Touch Buttons, Screen and Topdeck
Use a soft damp cloth to wipe all surfaces, and wipe dry. Avoid
using chemical or scouring cleaners, as these will damage the
paint and plastic surfaces of your washer.
Cleaning the Lid
You can also remove the lid for cleaning. Open the lid fully,
grasp the lid on both sides. Lift in an upward motion, as shown.
To replace the lid, hold the lid vertically and align both hinges
before pushing downwards and slotting back into place.
Cleaning the Detergent and Fabric Softener dispenser
Wipe out the Detergent dispenser with a damp cloth.
The funnel of the Fabric Softener dispenser (the top) clicks
off easily. Simply place a finger down the center and lift.
The receptacle is not removable and needs to wiped clean
periodically. If the siphon tube looks partially blocked use a
cotton bud to clean.
Fig.16 Removing the lid
Fig.17 Removing the
Fabric Softener funnel