Schneider SVTIN325 Instrucciones De Instalación Y Funcionamiento página 69

Screw the 4 worktop mounting brackets on the side walls of product.
worktop mounting bracket
· Secure the hob in place by putting it into cutout on the work surface.
· Before inserting the oven, it is necessary to remove the rear kitchen element panel in the area of
the oven opening, in order to supply cooling. Equally, the front part of the kitchen element must
have an opening of no less than 5 mm.
Min. 35 mm
Min. 5mm
Min. 10 mm
Min. 10 mm
14