Yamaha SPM-K1 Manual De Instalación página 7

Secure the unit.
Align the holes on the large wall mount bracket with the holes on the bottom of the small wall mount brackets, and then
use two of the projector mounting screws (M6 x 16) provided to secure the unit.
Bottom View
Sound Projector
Attach the safety wires to the wall.
Pass the screws (commercially available) through the loops of the safety wires, then tighten the screws to secure the
safety wires to the wall.
Make sure that the screws are strong enough to bear the weight of the projector and the brackets in case they fall.
Screw
(commercially available)
Washer
(commercially available)
Attach the safety wires tight.
Secure the safety wire to
the wall.
INSTALLATION PROCEDURE
Projector mounting screws
(M6 x 16)
Secure the safety wire
to the wall.
E-5