durher Ordesa M Manual De Instrucciones página 36

6
12
Tabla 5. General characteristics of the main components of the machine
Name
1. Legs
2. Water tank
3. Sliding cutting table
4. Head
5. Upper cover
6. Spindle
7. Motor
8. Tool shaft
9. Tightening clamp
10. Tightening nut
11. Cutting blade (optional)
12. Submergible pump
13. Controls and electric supply box
14. Rubber flap
15. Longitudinal guide
16. Blade nut tightening spanner
17. Blade shaft adjusting spanner
18. Tool support
19. Handle
13
19
7
10
3
1
Graphic 3.1. Machine components
Function
Table rigid support
Containing the water to cool the blade
Support for the piece to cut
Support for the diamond blade
Protects against cuts with the cutting blade
Rises the head to 200 mm.
Provides movement to the cutting blade
Cutting blade support
Cutting blade tightening and location clamps
Adjustment and blocking of the disc to the shaft
Cutting element
Cools the blade
Start, stop and connection to the electric supply of the machine
Avoids water spilling
Longitudinal guide of the piece to cut
Tightening of the nut to adjust the blade to the shaft
Adjustment of the blade shaft to tighten the nut
Place to store the tools
To move the head upwards or downwards
4
8
9
16
17
18
14
Specific characteristics
Foldable
With pump safety level
Dismountable end
Adjustable at 90° and 45°, and in height
Manufactured in Polycarbonate
Only in TEIDE model
Motor shaft
Left hand thread
ø 300 o ø 350 mm.
Fixed to water tank
Adjustable
39
5
15
11
2