Safety Instructions - Yamaha SPM-K30 Manual De Instalación

WALL MOUNT BRACKET
SPM-K30
Installation Manual
Thank you very much for purchasing the Wall Mount Bracket SPM-K30. Be sure to read this manual thoroughly before
using this bracket. After you have read this manual, retain it for future reference.
When installing the Digital Sound Projector using this bracket, all installation work must be
performed by a qualified contractor or dealer personnel. The customer must never attempt to
perform this installation work. Improper or inadequate installation could cause the Digital Sound
Projector to fall, resulting in personal injury.

SAFETY INSTRUCTIONS

• Always follow the instructions set forth in this manual when installing the Digital Sound Projector
using this bracket.
Improper or inadequate installation could cause the Digital Sound Projector to fall, resulting in personal injury.
• The installation must be secure enough to bear the weight of the Digital Sound Projector, the wall
bracket and other hardware indefinitely, and must also be secure enough to withstand vibrations.
Improper or inadequate installation could cause the Digital Sound Projector to fall, resulting in personal injury.
• To ensure safety, all screws must be tightened securely.
Loose screws could cause the Digital Sound Projector to fall, resulting in personal injury.
• Make sure to leave adequate ventilation space around the unit to allow heat generated by the Digital
Sound Projector to dissipate.
Failure to provide adequate space around the unit could cause the Digital Sound Projector to overheat internally,
resulting in a fire.
• Never hang from the Digital Sound Projector or the wall bracket.
Hanging from the Digital Sound Projector or the wall bracket could cause the Digital Sound Projector or the wall
bracket to fall, resulting in personal injury.
• Once the Digital Sound Projector is installed, safety checks should be conducted on a regular
basis.
If the Digital Sound Projector is used over an extended period of time, screws can become loose and the installation
can become weaker due to the passage of time, vibrations, etc.
SPM-K30
En 1