Belkin Hi-Speed USB 2.0 Manual Del Usario página 11

P73890-A_F5U222ea_man.qxd
Installation (continued)
The "Universal Serial Bus Controllers" list will now include
two "NEC USB Open Host Controller" entries, one "Belkin
USB 2.0 Hi-Speed Host Controller" entry, one "USB 2.0 Root
Hub Device" entry, and two "USB Root Hub" entries.
Note: If your computer features built-in USB ports, or if
you have other USB PCI controller cards installed, you will
see additional USB controller and root hub entries.
Installation Procedure for Windows Me
This installation procedure will successfully install two USB
1.1 OHCI controllers and one USB 2.0 EHCI host controller.
1. Insert the F5U222 installation CD into your CD-ROM
drive. After a few moments the main menu will
auto-start.
2. Select "Install USB 2.0 Driver".
3. The setup utility will now install a CardBus eject utility
for your USB 2.0 CardBus adapter. Take note of the
information provided regarding the eject utility, then
click "Next" to continue.
4. After the driver is installed select "Yes, I want to restart
my computer now." Click "Close".
5. After Windows restarts, locate your laptop computer's
CardBus slot.
6. Insert the Card into the slot. Apply pressure as needed
until it is fully seated.
9/30/02 3:48 PM Page 7
7
En