Belkin Hi-Speed USB 2.0 Manual Del Usario página 18

P73890-A_F5U222ea_man.qxd
4. Windows will automatically detect the hub and start the
"Add New Hardware Wizard". The wizard will search for
drivers for a "Generic USB Hub on USB 2.0 Bus".
Click "Next".
(If the search results list drivers for a "Generic USB Hub"
instead, cancel the wizard, go back to Device Manager
and confirm that the Belkin 2.0 drivers have been properly
installed.)
5. Choose "Search for the best driver for your device
(Recommended)". Click "Next" to continue.
6. Windows will now search the driver database on your
hard drive. Remove the check mark from all boxes and
click "Next".
7. Windows will locate the driver for "Generic USB Hub on
USB 2.0 Bus". Click "Next".
8. Click "Finish". Installation of your hub is now complete.
9/30/02 3:48 PM
Installation (continued)
14
Page 14