Selecting Touch-Button Indicator And Lighting Modes In Work Area; Touch-Button Indicator And Lighting Modes In Work Area - Gaggia Visacrem Vetro Manual De Instrucciones

5.

Selecting touch-button indicator and lighting modes in work area

5.1 Touch-button indicator and lighting modes in work area

- You can choose from 3 different indicator modes for the beverage selection keys and activate or deactivate the work area's lighting.
By default the machine will be in mode 2 for the touch-buttons and the lit work area. The work area lighting option can be deactivated.
Touch-button indicator Mode
Mode 1 indicator
a. By default all the LEDs of the touch-buttons
are off; when you press a button its LED
will come on and the others remain off.
Mode 2 indicator
(by default)
b. By default all the LEDs of the touch-buttons
are on; when you press a button its LED
will stay on and the others turn off.
Mode 3 indicator
c. By default all the LEDs of the touch-buttons
are on; when you press a button its LED
will turn off and the others remain on.
Work area lighting
Activating or deactivating the work area lighting
To actívate or deactivate the work area lighting, follow these instructions.
a. Turn off the machine with the main switch
b. Turn on the machine with the main switch and wait until the long coffee button from group 1 (left touch-button) goes out.
c. Then, hold down the button for one short Coffee until the touch-button lights turn on and off. Eventually, the machine will automa-
tically restart and the buttons will be lit.
Lighting activated
(by default)
b. The work area light is permanently on.
Lighting deactivated
c. The work area light never comes on.
28