Closing The Tank (Image 4); Inserting The Glass Panes (Image 5); Ignition (Image 6); Extinguishing (Image 7) - AUERHAHN TWISTFIRE Información Del Producto

Product information / Instructions for use
For a beautiful flame and for safe operation,
we recommend Auerhahn Premium Bio-Ethanol,
item no. 24 3700 2007.
Image 4
Closing the tank
To close, place the cap on so that both arrows are facing
each other. Turn the cap clockwise until it stops.
Image 5
Inserting the glass panes
Before you use your TWISTFIRE NEW GENERATION for
the first time, insert two of the three panes in the
mounts provided on the interior of the base body.
For every additional use, it suffices if you remove one
of the three panes for filling and ignition. Never close /
modify the slits between the glass panes.
Image 6
Ignition
You should wait 2-3 minutes after each filling until
the fibre metal plates are soaked. Then you can ignite
your TWISTFIRE NEW GENERATION. Use a stick lighter to
do so. With the patented fibre metal plates, the Safe
Flame Technology, patented in Germany, guarantees
a safe and secure lighting of the fire. They do not burn
up and do not need to be replaced.
Once your fireplace is burning, you can use the
third glass pane. As the flame height only gradually
develops, there is no risk here.
18
Depending on the climatic conditions (especially
humidity), it may be possible that the flame starts to
spin in a circle before beginning to rotate in the centre.
This is not a defect of the product.
The maximum flame height will be achieved after
approximately 5-10 minutes.
During operation
The glass panes may heat up to 120°C. During
operation and immediately thereafter you should not
touch the glass panes or the stainless steel body.
Let your TWISTFIRE NEW GENERATION cool down for
about 15-20 minutes after operation before you re-fill
the tank or re-ignite your fire light.
The appliance is not suitable for long-term use.
Do not pour water over the panes during operation or
immediately afterwards. This may cause stress cracks
or shattering.
Do not leave your TWISTFIRE NEW GENERATION in the
rain while burning or immediately following use.
Image 7
Extinguishing
To extinguish the ethanol flame, you should
generally only use the provided extinguishing hood.
Allow sufficient time for cooling.
Fully empty the tank before any prolonged storage
times.
Examine your TWISTFIRE NEW GENERATION before and
after every use for leaks in the tank or other damages
or changes.