7. Front wheel (500)
Move the tiller on road by the front wheel, lift the handlebars up and
ground the front wheel.
When the tiller is used in the field, move the wheel up by replacing the
lock pin.
(1) WHEN USED IN THE FIELD
(2) LOCK PIN
(3) WHEN MOVED ON ROAD
8. Handling Tips
Adjust the handlebar height to a comfortable position (usually waist
height is recommended)
If the machine jerk forward while tilling, press down the handlebars; if
the machine will not move forward, move the handlebars from side to
side.
Turn: The proper method of negotiating a turn is to lower the
handlebars to make the gravity of tiller backward centre toward the rear
and then make the turn. This will permit a turn with relative ease.
20