Tabla de contenido
Publicidad
Idiomas disponibles
Idiomas disponibles
Installation instructions.
5. Download the APP from the link given by the KUBUS technical
service.
6. Transfer the APP to Tablet or Smart Phone
7. Open the APP from the Tablet or Smart Phone. Search for the APP
named "Go-Scan".
2.8
CONNECT THE APP WITH W3 PROBE
Maintained the probe button pressed, it will automatically connect with the
APP. If the connection were to fail at any point, the probe connection
should be reconfigured following these simple steps:
1.
Open Configuration menu of the device (Tablet or Smart Phone)
2.
Open the WLAN configuration menu (as shown in the images below)
3.
Click on the Probe ID. The ID varies but as an example, the ID will be
similar to "UScanYAID031".
Publicidad
Tabla de contenido
