Technical Features - Ideos IDN10 Instrucciones De Empleo Y Montaje

Operating conditions
Maintain operating conditions for hot
ordnung für Bauleistungen [Construction
Observe limitations of use in damp loca-
Store and transport radiator only in the
For electrical accessory operation:
Complaint
Disposal
Packaging and any parts that are not need-
ed should be recycled or disposed of prop-

Technical features

•
•
•
–
–
for electrical accessory operation up to
80 °C
•
Electrical connection (for electrical acces-
–
Heating element preinstalled on the ra-
diator at the bottom right or left
–
Connection via electric set
Installation
With the heating element (IDN11) installed po-
6
Preliminaries (see Fig. 1–9)
For electrical accessory operation make sure
tion 16 A) installed according to regulation
-
Check the delivery for completeness and
When installing, only remove protective
-
packaging at the fastening and connection
–
–
–
On doing so pay attention to the position
doing so pay attention to the position of
Preinstall the bottom spacer (see Fig. 14)
bottom onto the spacer bolt and if neces-
Mount the radiator and align (see Fig. 15–18)
Hook the radiator onto the holders past the
-
-
-
-