Yamaha SPM-K8 Manual De Instalación página 8

INSTALLATION PROCEDURE
6 Secure the unit.
Align the holes in the large wall mount bracket with the holes in the bottom of the small wall mount brackets, and then
use two of the supplied projector mounting screws (M6 x 16) to secure the unit.
Bottom View
Sound Projector
7 Attach the safety wires to the wall.
Pass the screws (commercially available) through the loops of the safety wires and then tighten the screws to secure the
safety wires to the wall.
Make sure that the screws are strong enough to bear the weight of the Sound Projector and the brackets in case they fall.
Screw
(commercially available)
Washer
(commercially available)
Attach the safety wires tight.
E-6
Secure the safety wire to
the wall.
Projector mounting
screws (M6)
Secure the safety wire
to the wall.