Optical Sensor; Important; Use And Maintenance; Speed Sensor For Determination Of The Driven Distance - MASCHIO GASPARDO PRECIMAT Instrucciones Empleo Y Para El Montaje / Piezas De Repuesto

3.3.4 OPTICAL SENSOR

Important

Use only the enclosed plug-seal (is to be installed between
4pin. plug and socket).
The cable must be protected against squeezing and other dama-
ges.
The left aggreagate is occupied with the number 1 (in driving-
direction).
Colours of the wires:
ws = white ........... (Ground)
br = brown .......... (+ 12 V)
gn = green .......... (Signal)
cod. G19503910
WIRING HARNESS FIXING

USE AND MAINTENANCE

3.3.5 SPEED SENSOR FOR DETERMINATION OF THE DRIVEN
DISTANCE
The bush is installed with the enclosed M5 x 30 screws on the axle.
The sensor is to be mounted to the bush on the provided bracket
at a distance of 0-4 mm. A connector is provided for each wire in
the junction box.
Colours of the wires:
br = brown .......... (+ 12V)
gn = black ........... (Signal)
ws = blue .............
Then, turn the transmission wheel and check that the yellow
L ED on the sensor flashes in a regular manner.

(Ground)
ENGLISH
LED
17