OLSON OLFC186X Manual Del Usuario página 31

2. Remove the upper left hinge cover decorative cover, upper right hinge cover and upper right hinge, and
disconnect the right signal line (signal line terminal 1, 2) at the top of the box body.
3. Remove the refrigerator door body (be careful not to lose small parts such as the shaft sleeve and stop on the door)
Remove the middle hinge and remove the decorative cover of hinge hole on the other side.
4. Remove the freezing door body (be careful not to lose small parts such as the shaft sleeve and stop on the door)
Remove the hinge and adjust the angle. Remove and install the lower hinge shaft to the other side of the hinge, and
install the modified lower hinge to the other side of the box.
31