Changing The Light; Starting; Energy Saving Tips - OLSON OLFC186X Manual Del Usuario

2.4 Changing the light

Any replacement or maintenance of the LED lamps is intended to be made by the manufacturer, its service
agent or similar qualified person.

2.5 Starting

Before initial start, keep the refrigerator still for two hours before connecting it to power supply.
Before putting any fresh or frozen foods, the refrigerator shall have run for 2-3 hours, or for
above 4 hours in summer when the ambient temperature is high.
Spare enought space convenient opening of the doors and drawers or statement by the
distributor

2.6 Energy saving tips

The appliance should be located in the coolest area of the room, away from heat producing appliances or
heating ducts, and out of the direct sunlight
Let hot foods cool to room temperature before placing in the appliance. Overloading the appliance forces the
compressor to run longer. Food that freeze too slowly may lose quality, or spoil.
Los aliementos que se congelan demasido lentamente pueden perder calidad o estropearse.
Be sure to wrap foods properly, and wipe containers dry before placing them in the appliance. This cuts down on
frost build-up inside the appliance.
Appliance storage bin should not be lined with aluminum foil, wax paper, or paper toweling. Liners interfere with
cold air circulation, making the appliance less efficient.
Organize and label food to reduce door openings and extended searches. Remove as many items as needed at
one time, and close the door as soon as possible.
34