Warning - Eleglide M1 Manual Del Usuario

EN
Front suspension
Fork (F1)
Rubbers
Wheel hubs
Pedals
Cranks
Chain
Rims
Sprockets
Saddle and
Seat-post fastening
Stand
d.LUBRICATING
When lubricating, make sure the lubricant doesn't get on the brake discs and
pads. In the case of oil greases in the brake pads, their function may be lost

7. Warning

A) Do not expose the e-bike to direct sunlight or rain for an extended period
of time, and avoid storing it in places with high temperature or corrosive
gas, so as to avoid chemical corrosion and damage to the electronic parts
and painted surfaces, which may lead to operational failure and accident.
10
Entrust it to experts.
Check regularly for damage and wear. Keep repressures as
specified on the side.
Lubricate the hub bearings on a monthly basis. Check and
adjust the cones, if necessary, to prevent the hubs from
rubbing against the forks.
Lubricate the bearings and check for tightness.
Lubricate the bearings on a monthly basis (unless a
maintenance-free centre bracket is installed on the bike)
and check all centre bracket parts are correctly tightened.
Take it off and clean it every 6 months. The chain must be
clean but not dry.
Check frequently that the wheels are tight and securely
fastened. The rims should be protected from oils, waxes,
grease and adhesives, etc. Also check that the spokes
aren't loose or missing. Have them centered by a specialist
garage at least once a season or if the wheels start to roll.
Clean regularly as necessary and lightly grease. Keep the
front and rear derailleur running smoothly by adjusting.
Check that screws, nuts and quick-release devices are tight.
Clean and lightly grease annually.