Component List; General Power Tool Safety Warnings - Shopseries RC4151 Manual Del Usuario

1/4 IN. SHEET FINISHING SANDER

COMPONENT LIST

ON-OFF SWITCH
1
PALM GRIP HANDLE
2
DUST BOX
3
BASE PLATE
4
CLAMP LEVER
5
CLAMP LEVER LOCK
6
SANDING PAPER* (SEE FIG. A)
7
SAND PAPER CLAMP
8
MOTOR HOUSING
9
PAPER PUNCH* (SEE FIG. B)
10
VACUUM ADAPTOR* (SEE FIG. E)
11
* Not all the accessories illustrated or described are included in standard delivery.
ACCESSORIES
Dust box
Vacuum adaptor 32 mm(1-1/4")
Paper punch
60 grit clamp sanding paper
80 grit clamp sanding paper
120 grit clamp sanding paper
We recommend that you purchase your accessories
from the same store that sold you the tool. Use good
quality accessories marked with a well-known brand
name. Choose the type according to the work you intend
to undertake. Refer to the accessory packaging for
further details. Store personnel can assist you and offer
advice.
4
GENERAL POWER TOOL SAFETY
WARNINGS
1
1
WARNING! Read all safety warnings and
1
all instructions. Failure to follow the warnings
1
and instructions may result in electric shock, fire and/
1
or serious injury.
1
Save all warnings and instructions for future
reference.
The term "power tool" in the warnings refers to your
electric (corded) power tool or battery-operated
(cordless) power tool.
California proposition 65:
WARNING: This product may contain lead,
phthalate or other chemicals known to the
State of California to cause cancer, birth defects
and other reproductive harm. Wash your hands
after use.
ENG