Dieteg LMAB653 Instrucciones Sobre Piezas Y Accesorios página 15

4 CAB FITTING INSTRUCTIONS
29) When the engine has cooled
sufficiently top-up radiator with a 50/
50 anti-freeze mix.
30) Fit the ballast weights around the rear
axle using the illustration on page 17.
30) Refit the roof, toolbox and ensure that
the seat plate is bolted down using
the M10 x 30 screws provided.
PARTS AND FITTING INSTRUCTIONS FOR DIETEG
CAB TO HIGHWAY 2130 AND PARKWAY 2250 PLUS
When it is necessary to gain access under
the seat, the seat plate can be opened by
removing the two fixing screws. The seat
plate fixings should always be reassembled
and correctly tightened before operating the
machine.
WARNING
GB-13