Fitting Instructions - Dieteg LMAB653 Instrucciones Sobre Piezas Y Accesorios

1. Lower front cutting units, and lift seat
plate and disconnect negative
terminal of battery.
2. Remove toolbox from front of
machine.
3. Remove seat.
4. If the machine does not have the cut-
outs in the front bumper bar supports,
L (fig 0.9) it will be neccesary to make
them. Using the template on page 15
cut out the material, de-burr, and paint
the supports.
5. Fit brackets A (fig 1.0) ensuring
bracket is the correct way up, see
photo. Secure using the 8 socket head
counter-sunk head screws supplied.
6. Fit self adhesive ballon edge (fig 1.1)
GB-6

FITTING INSTRUCTIONS

FOR DIETEG CAB (LMAB 653/654) FOR
HIGHWAY2130 & PARKWAY 2250 PLUS
Fig 0.9
Fig 1.0
Fig 1.1