Free Standing Installation; Positioning The Appliance - OLSON OLDW60X Manual Del Usuario

Positioning The Appliance

Position the appliance in the desired location. The back should rest against the wall behind it, and the sides,
along the adjacent cabinets or walls. The dishwasher is equipped with water supply and drain hoses that can be
positioned either to the right or the left sides to facilitate proper installation.
Levelling the appliance
Once the appliance is positioned for levelling, the height of the dishwasher may be altered via adjustment of the
screwing level of the feet. In any case, the appliance should not be inclined more than 2°

Free Standing Installation

Fitting between existing carbinets
The height of the dishwasher, 845 mm, has been designed in order to allow the machine to be fitted between
existing cabinets of the same height in modern fitted kitchens. The laminated top of the machine does not
require any particular care since it is
Underneath existing work top
(When fitting beneath a work top) In most modern fitted kitchens there is only one single work top under which
cabinets and electrical appliances are fitted. In this case remove the work top of the dishwasher by unscrewing
the screws under the rear edge of the top (a)
53