Package Contents; Before First Use - Mr Maria FIRST LIGHT Manual De Instrucciones

EN
USER MANUAL
Congratulations on your purchase of a Mr Maria design and
welcome to the Mr Maria family! You are now proud parent to
the perfect light for your youngest family members.

PACKAGE CONTENTS:

• First Light containing the MrLED12 module (fig. 1 )
• The USB cable (adapter is not included)
• This manual
• Battery Safety Guide
Caution! For proper and safe use we ask you to read the
following instructions before installation and use of the
product.
WARNING!
Only use fully certified DC5V max. 2A USB-chargers de-
signed specifically for use with Lithium-Ion batteries.
• This product is an electronic device, not a toy or stuffed
animal.
• This product should be used under adult supervision at all
times during charging.
• Always place the product on hard surfaces and never in
bed.
• Keep the packaging out of reach of children.
• Save this manual for later reference.
• In case of wrong operation do not disassemble the
MrLED12 module itself.
Read the Battery Safety Guide

BEFORE FIRST USE

Simply follow these steps to introduce First Light's warm light
to your family:
1. Gently squeeze the lamp
out of the soft shell. B (
2. Plug the USB cable into the opening
the LED module. ( )
fig. 3
3. Connect the USB cable to a USB port by using a certified
USB charger. The product is charging when the red light
on the backside of the product is on.
4. Fully charge the product. Maximum charging time is 6
hours. The product is fully charged when the charging light
D turns green.
5. The battery is now full and your little friend is ready to
shine its First Light. Unplug the cable and put the module
back in the soft shell. B
6. Turn the light on by using the on/off button
the bottom of the product.
7. Adjust to the desired brightness by using the dimmer-
button on the bottom of the lamp. The lowest setting is
F
the nightmode.
When fully charged, First Light can shine between 8 and 120
hours (depending on the chosen brightness setting).
Please note that burning hours depend on several factors,
such as temperature conditions, battery age, charge cycles
and humidity.
A to take the MrLED12 module
)
fig. 2
on the backside of
C
located on
E
D