Cleaning The Product - Mr Maria FIRST LIGHT Manual De Instrucciones

QUESTIONS ABOUT USAGE
The article does not turn on:
• Make sure the brightness is not set to the lowest setting.
• Make sure the light is not charging. It needs to be discon-
nected from the charging cable to be able to shine its light.
The article is not charging:
• Make sure the USB cable is properly connected to the
USB port.
The article still doesn't work after you have completed the previous
steps / or is missing some parts.
• Did you make your purchase at a local store? Please con-
tact the store directly
• Did you order straight from Mr Maria? Please contact our
customer service via: warranty@mrmaria.com

CLEANING THE PRODUCT

To make sure your companion keeps shining bright, Mr Maria
made it easy for you to give your little friend a bath. Simply
follow the instructions below (
• Gently squeeze the lamp
out of the soft shell. Keep the MrLED12 module away from
any water.
• The soft shell can be washed in the dishwasher or can be
cleaned in the sink with mild soap.
• After the bath, let your product airdry completely before
putting the MrLED12 module back in the soft shell.
):
fig. 3
to take the MrLED12 module
A
B
THE SYMBOLS
A reference to this manual.
The MrLED12 module is an electronic device and does not
belong in the household rubbish but should be disposed of at
the place indicated by your municipality.
Symbol for Class III appliance.
This s ymbol on the bottom of the unit MrLED12 means that
the device operates on extra low voltage which is less than
50 volts alternating current.
Symbol indicating that this product is CE, FCC, RCM, REACH,
RoHS, KC & PSE approved.