Montipower BRISTLE BLASTER AXIAL Manual Del Usuario página 11

®
BRISTLE BLASTER AXIAL
Error
Unusual sound
Rotating belt
vibrating strongly
Mounting system
loosening during
operation
Cause
Mechanical parts not
sufficiently lubricated
Belt or other machine parts
defective
Water entering the machine
through the compressed air
supply
Mounting system is not properly
fastened
Foreign object jammed between
spindle and mounting system
Mounting system worn out
Belt defective
Screw not tightened or no fan
blade used
Screw / serrated washer worn
out
Operating instructions
Solution
Service by qualified technician
Insert new belt / service by qualified
technician
Service by qualified technician
Refit the mounting system
Remove object and remount
Use new mounting system
Insert new belt
Use serrated washer and tighten
screw
Use new screw / serrated washer
EN
11