Troubleshooting; Device Lowers Automatically - BEG 977718 Instrucciones De Manejo

8 Troubleshooting

Work on the hydraulic equipment
may only be carried out by trained
specialists!
Pay attention to safety instructions!

8.1 Device lowers automatically

Adjust the setting of the lowering valve.
Proceed as follows:
• Loosen the M...-set screw.
• Leave the lowering pedal in the normal position (up).
• Slightly adjust the lowering spindle with a screwdriver:
counter-clockwise to increase the lowering speed.
clockwise to reduce the lowering speed or to ensure that
the pump holds the load in position.
• Tighten the set screw slightly after each adjustment.
• Tighten the set
Operating instructions
Vent plug
Pressure control valve
Pump pedal
Lowering pedal
Hose connection
Danger
19