Aimetis E3200 Serie Guía De Instalación Y Usuario página 8

All manuals and user guides at all-guides.com
The may also be connected to two networks by using both the and ports on the
E3200 PSA LAN1 LAN2
back panel. Using two separate networks could be required if the video traffic must be isolated from the
corporate network. The video will only traverse the corporate network if a user wishes to see video. Oth-
erwise no video will traverse the two networks. shows a typical network layout when two net-
Figure 5
works are in use. It shows cameras are on a separate network from clients. This is not essential. They may
be mixed across two networks. and may be used interchangeably.
LAN1 LAN2
Figure 5: Two networks in use
Never connect the and ports to the same network.
LAN1 LAN2
Figure 6: Do NOT connect LAN1 and LAN2 to the same network
Connect the E3200 PSA to the Network 6