Play Music; Connect Ipod/Iphone With The Dock And Play Music - Onkyo RBX-500 Manual De Instrucciones

Play music

Connect iPod/iPhone with the dock
and play music
Connect iPod/iPhone with the dock and
play music
Open the lid of the dock.
1
Press the back end of the lid to raise the front
end, and lift it.
1
2
Connect iPod/iPhone with the dock.
2
Insert an iPod/iPhone in the connector of the
dock firmly. When RBX-500 is in the standby
mode, the power will automatically turns on..
Notes:
When a case is attached to iPod/iPhone, the
iPod/iPhone may not able to be surely
connected with the dock. This will cause
problems such as no sound or no control. When
this happens, remove the case before
connection.
All manuals and user guides at all-guides.com
3
Compatibility of iPod/iPhone
This unit can work with the following iPod/iPhone;
• iPod touch (1st, 2nd, 3rd and 4th generation)
• iPod classic
• iPod nano (3rd, 4th, 5th and 6th generation)
• iPhone 4S, iPhone 4, iPhone 3GS, iPhone 3G and
Notes:
Be sure to use update iOS for iPod/iPhone. Please see
detailed information of iOS at Apple website;
Charging
When an iPod/iPhone is connected with the dock,
the iPod/iPhone is charged. During standby, the
power indicator lights up darkly in white (in orange at
Bluetooth standby).
In addition, when an iPod/iPhone is connected with
the dock, USB terminal on the backside is powered
off. If you want to use the power from USB terminal,
remove an iPod/iPhone from the dock.
Press / button on the remote con-
troller.
button
U/I button
When input mode is iPod, you can control
iPod/iPhone to play music.
Tips:
When an iPod/iPhone is connected to the dock,
input mode is automatically changed to iPod.
This also happens when you start playing music
in iPod/iPhone; the input mode is automatically
changed to iPod.
iPhone
En-11