Play Music Through Wireless (Bluetooth) - Onkyo RBX-500 Manual De Instrucciones

Play music
—Continued
Play music through wireless (Blue-
tooth)
Pairing
For Bluetooth connection, a target Bluetooth device
needs to be registered (called pairing) to the main
unit in advance.
Place the main unit and a Bluetooth
1
device in the distance within several
meters, then power on each device.
Press button either on the main unit
2
or on the remote controller.
button
The main unit turns to pairing mode, and Blue-
tooth indicator (blue color) flashes fast.
Operate the Bluetooth device to make
3
the registration of the device with refer-
ence to the operation manual of the
Bluetooth device.
Tips:
• In case that the Bluetooth device displays a
selection screen for registration, select "Onkyo
RBX-500".
• In case that a passkey (also called password or
PIN code) is required, input "0000".
After pairing is completed, the Bluetooth indi-
cator of the main unit lights up in blue color.
If they are already connected each other, music
can be played.
En-12
All manuals and user guides at all-guides.com
Play music in a Bluetooth device
The main unit and a Bluetooth device need to be con-
nected through Bluetooth in advance. During Blue-
tooth connection, the Bluetooth indicator of the
main unit lights up in blue and you can control to
button
play music by wireless.
1
2
Notes:
• When the device registration is not completed
within 2 minutes, the Bluetooth indicator turns
to flash slowly. When this happens, press the
button on the main unit to turn off the Blue-
tooth once, and press the
perform pairing.
• Because pairing information is stored, pairing
is needed only one time per one Bluetooth
device unless pairing information is deleted.
• The main unit can store pairing information for
up to 8 devices. When pairing information is
stored for 9th Bluetooth device, the oldest pair-
ing information is deleted.
Press button either on the main unit
or the remote controller, or make a
Bluetooth connection from a device.
When button on the main unit is pressed, the
main unit attempts to connect with the Blue-
tooth device that was connected previously for
5 seconds. When the connection is not estab-
lished, make a Bluetooth connection from a
device. Or, turn off a Bluetooth device by once
pressing the button, and press the
again.
Operate a Bluetooth device to play
music.
Notes:
In case that equalizer or bass booster of a
Bluetooth device is activated, sound may be
distorted.
button again to
button