Alpina Geneva AJ56-LED Manual De Instrucciones página 11

edges. Damaged power lines increase the risk of an
electric shock.
The voltage of the power source must comply with
the specifications on the name plate of the heater.
Devices marked with 230 V can also be operated
with 220 V. Before operation it is imperative to make
sure that the installation location corresponds to the
requirements of the safety instructions.
• Insert the power plug into an earthed outlet.
Note: Please observe that the power plug must still be able to be
reached after installation of the electric fireplace insert.
Avoid the power line from becoming a trip hazard.
Therefore, always run it away from the unit from the
back.
Your electric fireplace insert is now ready for operation.
Operation
Note: When the heater is turned on for the first time, a slight,
harmless odour can develop. This odour develops due to the heating
up of the inner heating elements. Provide sufficient ventilation.
Switching flame simulator on / off
Note: You can also switch on the flame simulator when you are not
using the heating function.
Note: Power consumption of the electric fireplace insert with
illumination switched on but without heating function amounts to
11