Intended use
The unit is intended to generate hot air in closed, dry rooms. The
electric flame simulator conveys a log fire atmosphere. Other types
of use or modifications of the unit are not regarded as intended and
pose serious danger of accidents. The manufacturer is not liable for
any damages caused by any use other than for the intended purpose.
The unit is designed for use in private households and not suitable for
commercial purposes.
Technical specifications
Model:
Nominal voltage:
Rated power:
Power stages:
Illuminants:
Dimensions:
Weight:
Scope of delivery
Immediately after unpacking please check if the delivery is complete
and also if all parts of the product are in good condition.
One electric fireplace
One operating instructions
One Warranty card
Description of parts (referring to illustration/pictures page 2)
1. MDF mantelpiece
2. Electric heater with fireplace effect
3. Cover
4. Wood log
5. Glass plate
6. ON / OFF switch
7. Heat switch
8. Thermostat control
9. Dimmer control
10. Ventilation slot
AJ56-LED
230 V ~, 50 Hz
max. 1800W
1 (1800 W)
2 x 1 W LED
ca. 70 x 22 x 71.5 cm (w x d x h)
ca. 17 kg
5