Abs Anti-Blocking System; General Instructions About The Laminator; Getting Ready To Laminate - monolith OL 215 Manual Del Usuario

Laminator

ABS Anti-Blocking System

Your laminator is equipped with an Anti-Blocking System. If the pouch was not
inserted straight or it becomes jammed in the machine, push the ABS switch
toward the left. You can then take the laminating pouch and its contents out of the
machine and reinsert the document in a new pouch into the film feed slot

General instructions about the laminator

Please read the manual before using the machine.
Please note! When using the machine, you may find it gives off a
slight odour. Please ensure there is sufficient ventilation in the room,
e.g. by opening a window.
A laminator is not a toy.
Keep it locked away from children!

Getting ready to laminate

- Site the machine so that there is enough space to insert the laminating
pouches (in other words, not right in front of a wall or other objects).
- Insert the plug into an earthed power socket (120 V = domestic power supply).
- Switch the machine on using the ON/OFF switch.
- Select either hot or cold lamination by flipping the HOT/COLD switch
desired position.
Note: Your laminator supports lamination of 3mil and 5mil (80mic and
125mic) film without mode-switching.
- The ready indicator
reached the correct temperature.
The preheating time can vary depending on the ambient temperature
and air humidity.
6
www.monolith-support.com
MODEL: OL 215 PRODUCT CODE: 91816 03/15
3
will turn from blue to red once the laminator has
User Guide
6
4
.
2
to the
AFTER SALES SUPPORT
1 877-386-8264