General Tips On Laminating; How To Laminate - monolith OL 215 Manual Del Usuario

Laminator

General tips on laminating

After laminating
1. Set the on/off toggle switch
2. Pull the mains plugs from its socket.
3. Leave the machine to cool before storing.
Cleaning the rollers
1. Switch on the machine.
2. Fold a sheet of A4 paper and insert this, folded edge first, into the pouch
feed tray
Keep repeating this process until no more glue deposits cling to the paper.
Cleaning the machine
1. Always remove the mains plug from its socket before cleaning the machine.
2. Let the machine cool down.
3. Always clean the machine with a soft cloth. Use neutral cleansing
agents, never abrasives.

How to laminate

- Please note! Only take one pouch per lamination, as pouches stick
tightly together. Place the document that you wish to laminate between
the two sides of the laminating pouch. Ensure that it lies flush with the
closed edge.
- Insert the laminating pouch closed-edge-first into the slot
the machine. The rollers will automatically pull the pouch in and transport it to
the output slot
samples. In the event of jamming, see the ABS section.
- Let the pouch cool for a bit, and then it's ready.
- If the laminating pouch has not adhered properly to the paper, repeat the
process.
AFTER SALES SUPPORT
1 877-386-8264
1
4
.
5
on the front of the machine. Don't use force to pull out the
to "off".
MODEL: OL 215 PRODUCT CODE: 91816 03/15
User Guide
4
on the back of
www.monolith-support.com
7