Charging Mobile Devices Using The Speaker; Troubleshooting - Targa SilverCrest SLXL 30 C1 Manual De Instrucciones E Indicaciones De Seguridad

Tabla de contenido

Publicidad

Idiomas disponibles
  • ES

Idiomas disponibles

  • ESPAÑOL, página 142

9.5 Charging mobile devices using the speaker

You can charge mobile devices such as smartphones or tablets using the speaker. These use the
speaker's integrated rechargeable battery and reduce its charge level accordingly. Proceed as
follows:
Connect the USB C connector of the charging cable (B) included to the USB C charging socket
of the device to be charged. Alternatively, you can also use the original USB charging cable of
the respective device manufacturer.
Now connect the USB A connector of the charging cable (B) to the USB A socket (10) on the
speaker.
Briefly press the on/off button
automatically.
Disconnect the charging cable (B) from the speaker and mobile device to end the charging
process. Charging is also interrupted or stopped when the speaker is turned off.

10. Troubleshooting

The speaker will not switch on
The battery of the speaker is empty. Charge the battery with a suitable USB mains adapter.
Pairing with a compatible Bluetooth
Check whether the speaker is switched on. Switch it on, if necessary.
Check the distance between the speaker and Bluetooth
Obstacles and electronic devices can have a negative impact on the reception range. Reduce
the distance between the devices, if necessary.
Check that the Bluetooth
Activate the Bluetooth
If a 3.5 mm cable is plugged into the AUX IN jack (9), remove it, because the Bluetooth
does not work if a cable is plugged in.
Make sure that a previously paired connection with another Bluetooth
active. If necessary, disconnect the connection and reconnect to the desired audio source.
No sound
Increase the volume of the speaker. In AUX IN mode, increasing the volume on your playback
device can also solve the problem.
You notice limitations in functionality
This problem may be related to the software of your Bluetooth
necessary, try to update the software version. Please consult the operating manual of your
®
Bluetooth
device.
(1) to switch the speaker on. The charging process will start
®
device will not work
®
feature is enabled on the Bluetooth
®
feature, if necessary.
SilverCrest SLXL 30 C1
®
device. This may not exceed 10 metres.
®
device that is providing the audio.
®
®
device not being up to date. If
®
feature
device is no longer
English - 31

Publicidad

Tabla de contenido
loading

Tabla de contenido