Garant 65 5550 Manual De Instrucciones página 14

65 5550
POWER ON AND RESETTING THE
WRENCH
„ Long press
DE
„ After ☐☐☐☐ performed , original dial
EN
Usually press
reset the digital torque wrench before
using it. Notice to keep the wrench hori-
zontal and rest during reset process.
ATTENTION:
If an external force is applied to the
torque wrench during power-on/reset
or wake up period, an initial torque
offset will exist in the memory.
FR
POWER SAVING AND
AUTO POWER OFF
„ The wrench will decrease screen
„ The wrench will auto power off after
IT
While existing torque offset , auto
power off function is disabled.
Re – POWER ON
„ If the wrench does not function
ES
14
torque wrench.
gauge shows on display
brightness after about 30 seconds
idling for power saving. Appling force
again can wake screen up.
about 2 minutes idling.
Press again can power on the
wrench .
CAUTIONS:
normally, remove battery then install it
and power on again.
to power on the digital
with buzzer beep to