Temper KCM-RJ-0767493 Instrucciones De Operación página 34

VDV Wire Tester
10-Indicates wiring error on cable being tested.
11- Appears when the tone generator is activated
12-Indicates that two or more wires are shorted to each other.
13-Flashes when the tester is connected to a cable with voltage on it, exposure to voltage can
damage the tester, if this warning appears, immediately disconnect the cable from the tester.
14-Appears when one or more pairs are open.
15-Indicates low battery, when this symbol appears, results from the tester may not be reliable
and the battery should be replaced immediately.
16-Appears when the tester detects a Remote ID, the number that appears corresponds to the
number on the Remote ID.
17-Appears when the tester detects the signal is split between two or more pairs.
4
5
6
7
8
9
8
.
1 2 3
10
11
12
13
14
15
16
17