Publicidad
Idiomas disponibles
Idiomas disponibles
THE APP+ CARD ALLOWS THE APP TO IDENTIFY THE TYPE OF Pc board. THE APP SHOWN THESE SPECIFIC PARAMETERS FOR ITS CONFIGURATION
CONTROL PANEL
PHOTOCELL 2
AUTOTEST PHOTOCELLS
CLOSURE AFTER THE TRANSIT OF THE VEHICLE "OK CLOSE"
TRAFFIC LIGHT CONTROL "TLC"
ELECTRIC LOCK
GATE LOCK MAGNETS (AU VERSION)
GATE LEAVES OPENING DELAY TIME
GATE LEAVES CLOSING DELAY TIME
CONTEMPORARY OPENING/CLOSING
STOP COMMAND WITH BRIEF INVERSION
GRADUAL START
ELECTRONIC BRAKE
HELP TO RELEASE THE ELECTRIC LOCK
ENERGY SAVING (ACCESSORIES OFF WITH GATE STILL)
LOCK / UNLOCK SETTINGS
LOCK / UNLOCK COMMANDS
"HOLD-TO-RUN CONTROL" WITH SAFETIES ENABLED
INDUSTRIAL MODE (OPEN COMMAND IMPULSIVE, CLOSE MAINTAINED)
SYNCHRONIZATION OF 2 PC BOARDS
"ALWAYS WORKS" MODE IN PRESENCE OF FAULTY SAFETY DEVICES
MAINTENANCE CYCLES (ESTABLISHED, TOTAL, PARTIAL)
SPEED CHANGE IN CASE OF OVERCURRED CYCLES
VISUALIZATION OF PLANTS AND MAINTENANCE LOGS REGISTER
MOTOR TYPE SELECTION
DEFAULT SETUP RESET (REMOTE CONTROLS EXCLUDED) AND PARTIAL SETUP RESET
(ENGINE TIMES EXCLUDED)
TIMED OPERATION OR WITH ELECTRIC LIMIT SWITCHES
SELECTION 1-2 ENGINES
RIB GATE
⚠
To activate this card, simply download the RIB GATE App from the Apple Store or Google Play and register yourself as an installer.
In an installation company, the first Installer/Owner who registers will receive a company code. This company code must be used for the registration of all the
installers of the same company so that they will be able to share all the systems built.
⚠
To match the control panel in which you have inserted the APP code APP8050 card to your smartphone, register as an "Installer" in the RIB GATE App you downloaded
on your smartphone. Only as an installer can you authorize users' smartphones to use this bluetooth card.
Once you have registered and feeded the system, the card will appear in the smartphone APP. Following the various steps you will then be able to enable the remote controls and smartphones of
the various users.
You can give permissions such as:
- Administrator / Owner of the house.
- User.
RIB Cloud => https://cloud.ribind.it
With personal account Installer - Administrator / Owner of the house
Via web browser it is possible to:
- access to your personal web space where all the registered systems are present.
- insert the installer logo and the installer data (the Users app is updated automatically by uploading the installer logo and its contact details).
- Automatically download data to the cloud every time the Bluetooth 4.2 signal connects.
- have access to all the features in the RIB GATE App. They will be available directly to those who are enabled to interact with the module (Installer, administrator / Owner).
L1
L1 24V
B2
●
●
●
●
●
●
●
●
●
●
●
●
●
●
●
●
●
●
●
●
●
●
●
●
●
●
●
●
●
●
●
●
●
●
●
●
●
●
●
●
●
●
●
●
●
●
●
●
●
●
●
●
●
●
●
●
●
9
B2 24V/B2D 24V
P1
●
●
●
●
●
●
●
●
●
●
●
●
●
●
●
●
●
●
●
●
●
●
●
●
●
●
●
●
●
●
●
●
●
●
●
●
●
●
●
G
B
P1 24V
●
●
●
●
●
●
●
●
●
●
●
●
●
●
●
●
●
●
Publicidad
