Braun InterFace 3105 Manual Del Usuario página 6

1 Description
1 Foil protection cap
2 Shaving foil
2a Floating cutter
3 Cutter block
Specifications
• Wattage: 3 Watts
• Voltage range: 100-240 V2/ 50 or 60 Hz (automatic adaptation)
2 Shaving
Switch positions
off
on = Combination shave (simultaneous use of floating cutter and
shaving foil). The floating cutter cuts longer beard hairs or curly
«problem hairs», the foil follows to give a close, smooth shave (b).
foil = Shaving foil without floating cutter.
trim = The long hair trimmer is activated (for trimming sideburns, moustache
and beard) (c).
Tips for the perfect shave
• We recommend that you shave before washing, as the skin tends to be
slightly swollen after washing.
• Hold the shaver at right angles (90°) to the skin.
• Stretch your skin and shave against the direction of beard growth.
• Replace the shaving foil and cutter block every 1
are worn, to ensure optimum shaving performance.
3 Keeping your shaver in top shape
3.1 Cleaning
• After shaving, switch the shaver off. Press the release buttons, take off the
shaving foil (d) and gently tap it out on a flat surface (e).
• Then thoroughly clean the cutter block with the brush (f). About every four
weeks, clean the cutter block with Braun cleaning agents (g).
• Do not clean the shaving foil with the brush.
• If you have a very dry skin and you notice a reduced operation time of the
shaver, you should put a drop of sewing machine oil onto the cutting parts (g).
6
4 Release button
5 Pop-out long hair trimmer
6 Switch
7 Shaver socket
1
/ years, or when the parts
2