Uline H-2931 Instrucciones

H-2931, H-5646
π
H-6264, H-7765
4 WHEEL COMBO
KEY CABINET
NOTE: 4-wheel changeable combination is
factory set to 0-0-0-0. To unlock, enter correct
combination and turn knob clockwise.
CHANGING PASSWORD
1. Dial initial password "0-0-0-0" to unlock key cabinet.
2. Go to the back side of the lock. Find the setting
switch. The initial state is A. Shift the setting switch
from A to B. (See Figures 1 and 2)
Figure 1
Figure 2
B
A
NOTE: Current password must be entered in
dial to reset the password.
3. Dial four-digit password user wants to set.
4. Shift the setting switch from B back to A to complete
setting up the password.
NOTE: Spare key is included to manually
unlock the key cabinet in case combination is
forgotten.
PAGE 1 OF 3
1-800-295-5510
uline.com
INSTRUCTIONS
1. On back side of the lock, a pushable tab is located
B
A
RETRIEVING PASSWORD
by each dial. The tab can be pushed down only
when correct number is in the dial. (See Figure 3)
Figure 3
2. Test each number for the four dials to retrieve the
correct password.
Para Español, vea página 2.
Pour le français, consulter la page 3.
1021 IH-2931