VI.MAINTENANCE
1. Tighten screws and nuts regularly, as the vibration caused by repeated use may loosen
hardware.
2. Treadmill is lubed at manufacturer, however you may lubricate before first use, and use
chart below (left) for how frequently to lube thereafter. To lubricate (fig. 1) unplug treadmill,
pull up the belt on one side, and spread or spray silicone onto platform. Repeat on other
side. Plug treadmill in, use button on remote to power it on, and then let it run for a few
minutes to distribute silicone. Never put silicone lubricant on the top surface of the belt.
< 3 hours/week
4 – 7 hours/week
> 8 hours/week
2 months
1 month
15 days
Https://www.LikeSporting.com
Fig. 1
13