Parts Diagram - Sani-tip D-1 Manual Del Usuario

INDICATIONS FOR USE
For the conversion of Den-Tal-Ez/Star Air/Water
Syringes (D-1), to adapt the syringe for the use of
Sani-Tip disposable syringe tips.
®
WARNINGS
• Sani-Tip Conversion Kits are designed to function exclusively with Sani-Tip disposable syringe
®
tips. Use only adapter components and clear Sani-Tip plastic syringe tips manufactured by DENTSPLY
Professional for the Sani-Tip
potential for cross-contamination. Follow the enclosed instructions.
• Sani-Tip disposable syringe tips are for single use only. Dispose after use.
®
• It is the responsibility of the Dental Healthcare Professionals (DHCP) to determine the appropriate
uses of this product and to understand the health of each patient, the dental procedures being
undertaken, and industry and governmental agency recommendations, requirements, and
regulations for safe practice of dentistry.
• To ensure adequate protection from cross contamination from other devices connected to the
Dental Unit, it is highly recommended that the Dental Unit be installed with anti-retraction features.
Additionally, the Dental Unit, including the anti-retraction features, must be properly maintained and
periodically tested. For more information, please contact your Dental Unit manufacturer.
• Where asepsis is required or deemed appropriate in the best professional judgement of the DHCP,
this product should not be used.
PRECAUTIONS
• Although this conversion kit may be used with all Sani-Tip disposable syringe tips, it is
recommended for use with the Standard (76mm) Sani-Tip disposable syringe tips.
• To help reduce cross contamination, use a new Sani-Shield disposable air/water syringe sleeve
for every patient.
D-1 CONVERSION KIT FOR AIR/WATER SYRINGES
2
® System to ensure optimal performance and safety including reducing

PARTS DIAGRAM

Hex Key
1) Standard Tip 76mm
2) Thumb Nut
3) Plastic Cone
4) O-ring
CONTRAINDICATIONS
This Conversion Kit is not indicated for use with
any other air/water syringes.
5) Adaptor
6) O-ring
7) O-ring