Maintenance And Service - Bosch GTA 60 W Professional Manual Original

OBJ_BUCH-857-003.book Page 16 Thursday, January 29, 2009 10:22 AM
20 | English
16 | English
Preparing the Saw Stand
Setting Up the Saw Stand
(see figure F)
Before fastening the power tool, the stand base
must be pulled apart.
– To relieve the limit bolts 4, lightly pull the
saw stand upward by the handle 3.
– Release lock 2.
This pulls back the limit bolts that lock the
wheels in place.
– Position one foot on the foot lever 10 and
push the handle 3 downward with both
hands until the limit bolts engage again.
– Close the lock 2.
The height-adjustable legs 5 are used for level-
ling the saw stand.
– Loosen lock nut 12 and screw the legs in or
out until the saw stand is aligned level.
Fastening the Power Tool to the Mounting
Plate (see figure G)
The mounting plate 1 is universally usable. With
the varying mounting holes, both Bosch power
tools as well as other brands can be mounted to
the saw stand.
1 609 929 S18 | (29/1/09)
F 000 622 331 | 07.2010
All manuals and user guides at all-guides.com
Mounting
Brand Model hole
Bosch GTS 10 B
DeWALT DW744XP D
Metabo TS 250 Me
Makita 2703 M
Hitachi C 10 R A 2 H
– Position the power tool onto the matching
mounting holes.
– Screw the mounting plate and the power tool
together with the fitting bolts, washers and
nuts.
Operation
Working Advice
Do not overload the saw stand. Always observe
the maximum carrying capacity of the saw
stand.
Before working, always make sure that the lock
2 is closed.
Always hold the workpiece firmly, especially the
longer and more heavy section. After cutting
through the workpiece, the centre of gravity
may become dislocated in such an unfavourable
manner that the saw stand tips over.
Transport
The stand base must be folded together for
transport. (see figure H)
– To relieve the limit bolts 4, lightly push the
saw stand downward by the handle 3.
– Release lock 2.
This pulls back the limit bolts that lock the
wheels in place.
– Position one foot on the foot lever 10 and
push the handle 3 upward with both hands
until the limit bolts can engage again.
– Close the lock 2.
Bosch Power Tools
Bosch Power Tools
OBJ_BUCH-857-003.book Page 17 Thursday, January 29, 2009 10:22 AM

Maintenance and Service

Maintenance and Cleaning
If the saw stand should fail despite the care tak-
en in manufacture and testing, repair should be
carried out by an authorised customer services
agent for Bosch power tools.
In all correspondence and spare parts orders,
please always include the 10-digit article
number given on the type plate of the saw
stand.
Wheel Inflation Pressure
The wheels are provided with an inflation pres-
sure of 1.7–2 bar. The maximum wheel inflation
pressure is 2.5 bar.
After-sales Service and Customer
Assistance
Our after-sales service responds to your ques-
tions concerning maintenance and repair of your
product as well as spare parts. Exploded views
and information on spare parts can also be
found under:
www.bosch-pt.com
Our customer consultants answer your ques-
tions concerning best buy, application and ad-
justment of products and accessories.
Great Britain
Robert Bosch Ltd. (B.S.C.)
P.O. Box 98
Broadwater Park
North Orbital Road
Denham
Uxbridge
UB 9 5HJ
Tel. Service: +44 (0844) 736 0109
Fax: +44 (0844) 736 0146
E-Mail: SPT-Technical.de@de.bosch.com
Bosch Power Tools
F 000 622 331 | 07.2010
English |
English | 17
Ireland
Origo Ltd.
Unit 23 Magna Drive
Magna Business Park
City West
Dublin 24
Tel. Service: +353 (01) 4 66 67 00
Fax: +353 (01) 4 66 68 88
Australia, New Zealand and Pacific Islands
Robert Bosch Australia Pty. Ltd.
Power Tools
Locked Bag 66
Clayton South VIC 3169
Customer Contact Center
Inside Australia:
Phone: +61 (01300) 307 044
Fax: +61 (01300) 307 045
Inside New Zealand:
Phone: +64 (0800) 543 353
Fax: +64 (0800) 428 570
Outside AU and NZ:
Phone: +61 (03) 9541 5555
www.bosch.com.au
Disposal
The saw stand, accessories and packaging
should be sorted for environmental-friendly re-
cycling.
Subject to change without notice.
1 609 929 S18 | (29/1/09)
Bosch Power Tools
21