Cleaning And Maintenance - Proline PL1800 Manual Del Usuario

CLEANING AND MAINTENANCE

Unplug the plug-in connector from the mains socket and then remove
it from the appliance.
• NOTE: When removing the plug from the main socket, be sure to
grab the entire plug and do not pull the cord.
Allow the appliance to cool down before cleaning.
Do not immerse the cooking plate and plug-in connector in water.
Clean them with a slightly damp cloth.
Carefully remove the drip tray and dispose of the collected oil. NOTE:
Do not pour the oil down the drain, as it may solidify and cause
blockages.
Clean the drip tray in warm soapy water. Rinse thoroughly.
Clean the outer surface of the appliance with a slightly damp cloth.
Remove excess oil from the cooking plate with a piece of kitchen
paper and then clean it using a damp cloth or sponge with a little
mild detergent. Dry with a soft cloth.
Clean the cooking plate after each use.
Caution! Never use abrasive or chemical cleaning agents, as they
could damage the appliance and the non-stick coating of the cooking
plate.
Surfaces in contact with food should be cleaned regularly to avoid
cross contamination from different types of food, the use of a damp
cloth is advisable when dealing with surfaces that come into contact
with food.
Correct food hygiene practices should always be followed at all
times to avoid possibility of food poisoning / cross contamination.
The plug-in connector must be completely dry before you insert it
into the connecting socket of the appliance.
26