CHAPTER -1: GENERAL WARNINGS
Before using your fridge freezer
• Before setting up your fridge freezer, check for any visible damage. Do not install or use your fridge
freezer if it is damaged
• When using your fridge freezer for the first time, keep it in an upright position for at least 3 hours before
plugging into the mains. This will allow efficient operation and prevent damage to the compressor.
• You may notice a light odour when using your fridge freezer for the first time. This is perfectly normal and
will fade away as the fridge starts to cool.
Information about new-generation cooling technology
Fridge freezers with new-generation cooling technology have a different working system than
static fridge freezers. In normal fridge freezers, humid air entering the freezer and the water
vapour emanating from the foods, turns into frost in the freezer compartment. In order to melt
this frost, in other words defrost, the fridge has to be unplugged. In order to keep foods cold
during the defrosting period, the user must store the food elsewhere and the user must clear the
remaining ice and accumulated frost.
The situation is completely different in freezer compartments equipped with new-generation
cooling technology. With the aid of fan, cold and dry air is blown throughout the freezer
compartment. As a result of the cold air that is blown easily throughout the compartment – even
in the spaces between shelves – foods are frozen equally and properly. And there will be no
frost.
The configuration in the refrigerator
compartment. Air emitted by the fan located at the top of refrigerator compartment is cooled
while passing through the gap behind the air duct. At the same time, air is blown out through
the holes on the air duct so that cooling process is successfully completed in the refrigerator
compartment. Holes on the air duct are designed for even air distribution throughout the
compartment.
Since no air passes between the freezer and refrigerator compartment, odours will not mix.
As a result, your fridge with new-generation cooling technology is easy to use and it offers you
an access to a huge volume and aesthetic appearance.
CHAPTER -2: YOUR FRIDGE FREEZER
This appliance is not intended to be used as a built-in appliance.
А
2
3
4
B
5
6
7
8
9
10
This figure has been drawn for information purposes to show the various parts and accessories in the appliance.
Parts may vary according to the model of the appliance.
General notes:
Fresh Food Compartment (Fridge): Most efficient use of energy is ensured in the configuration with the drawers
in the bottom part of the appliance, and shelves evenly distributed, position of door bins does not affect energy
consumption.
Freezer Compartment (Freezer): Most Efficient use of energy is ensured in the configuration with the drawers and
bins are on stock position.
compartment will
be nearly same as the freezer
1
16
A) Freezer compartment
15
B) Refrigerator compartment
14
1) Freezer light & cover *
13
2) Freezer shelf
3) Ice-matic
4) Freezer door shelves *
5) Wine rack *
12
6) Refrigerator shelves
7) Chill Drawer *
8) Crisper cover
11
9) Crispers
EN -7-
10) Levelling feet
11) Refrigerator door bottom shelf *
12) Refrigerator door bottle shelf
13)
Adapti-Lift
door shelf */
Refrigerator door upper shelf
14) Refrigerator light & cover
15) Refrigerator door upper shelf
16) Egg holder
* In some models