Basic Operations
! If the destination name is not stored, the
longitude and latitude of the destination
is displayed.
5 Compass
Shows the direction your vehicle is travel-
ling.
6 Time (TIME)
Shows the current time.
7 Voltage (BATT.)
Shows the battery voltage.
8 Tachometer (TACH)
Shows the engine speed in revolutions per
minute (rpm).
9 Lateral acceleration (LAT.G)
Shows the acceleration in the lateral direc-
tion.
a Longitude and latitude (LON./LAT.)
Shows the longitude and latitude of the cur-
rent location of your vehicle.
b Acceleration (ACC.G)
Shows the acceleration in a forward direc-
tion. The + sign indicates acceleration
while the sign indicates deceleration
(braking).
c Speedometer (SPEED)
Shows your vehicle speed.
All manuals and user guides at all-guides.com
Virtual mode
1
2
3
6
7
In the virtual mode, there are three different
types of display: Virtual country, virtual desert
and virtual city.
You can turn the various indicators on or off.
(Refer to Switching the indicators on or off on
page 15.)
1 Distance to the destination
Shows the straight distance between the
destination and the current location.
2 Direction arrow
Shows the direction towards the destina-
tion.
3 Destination name
Shows the name of the destination stored in
this unit.
! If the destination name is not stored, the
longitude and latitude of the destination
is displayed.
4 Time (TIME)
Shows the current time.
5 Altitude (ALTI.)
Shows the altitude of the current location.
! The altitude can be indicated from 0 to
4000 m.
Section
03
4
5
8
11
En