Setting Units And Scales; Selecting Your Area; Selecting Language - Pioneer AVG-VDP1 Operación Manual

Setup adjustments

Setting units and scales

You can select the units and the scales of
each meter.
1 Touch Menu and then touch SETUP.
2 Touch Unit/Scale.
3 Select the units of each meter.
! To switch a unit of Speed (speed), touch
km/h or MPH.
! To switch a unit of Power (horsepower),
touch kW, ps or hp.
! To switch a unit of Torque (torque), touch
kg"m, lb"ft or N"m.
4 Select the scales of each meter.
! To select one from among three scales for
speedometer, touch Speed.
! To select one from among four scales for
tachometer, touch R"P"M.
! To select one from among three scales for
horsepower meter, touch Power.
! To select one from among three scales for
torque meter, touch Torque.

Selecting your area

By selecting your area, this function lets you
improve the positioning accuracy by GPS. Be
sure to select your area properly.
! If your area is not select, this unit may not
work properly.
! This unit uses WGS 84 of the world geode-
tic system. (Refer to page 34.)
All manuals and user guides at all-guides.com
Area division map
1
! Area 1  Long. 30°W to Long. 40°E, Lat. 31°
N to Lat. 71°N
! Area 2  Long. 25°W to Long. 165°W, Lat.
40°N to Lat. 80°N
1 Touch Menu and then touch SETUP.
2 Touch Area.
# When you enter the area setting, clock is reset
to the default time originally set in this unit.
3 Touch Area to select the area of current
location of your vehicle.
Each time you touch Area it selects area in
the following order:
Area 1 (Western Europe)Area 2 (Eastern
Europe)

Selecting language

You can select the desired language for dis-
playing CAUTION screen and for entering
names by keyboard.
1 Touch Menu and then touch SETUP.
2 Touch Caution/Keyboard.
3 Touch the desired language.
Section
08
2
29
En