How To Run / Stop A Group - Mitsubishi Heavy Industries SC-SL2NA-E Manual Del Propietário

How to Run / Stop a Group

This runs or stops a group.
Method A
< RUN > With the air conditioners stopped (RUN / ERROR display off), press a GROUP RUN / STOP but-
ton
All the indoor units in the group run and the RUN / ERROR display lamp lights up green.
< STOP > With the air conditioners running (RUN / ERROR display lamp lit up green), press a GROUP
RUN / STOP button.
All the indoor units in the group stop and the RUN / ERROR display lamp goes out.
Method B
1. Press the ALL / GROUP / ONE button and select GROUP.
The options are displayed in the order.
2. Press the SELECT (
If you select Group 88, all the registered groups run or stop.
3. Press the RUN or STOP button.
Note
• The CENTER / REMOTE setting for indoor units can only be made for indoor units set to "CENTER" or "CENT-
ER" and "REMOTE".
This operation is disabled on indoor units set to "REMOTE".
1 2
or ) button to set the group number to run or stop.
RUN / ERROR display lamp
GROUP RUN / STOP button
3
– 16 –